Products

TR-MONITOR-2

The TR-MONITOR-2 is an addressable monitor module with two initiating circuits for use with Triga fire alarm control panels (FACPs). The TR-MONITOR-2 acts as an interface to contact devices, such as waterflow switches and pull stations.

 

The TR-MONITOR-2 supports Class B supervised wiring to the load device. Conventional 4-wire smoke detectors can be monitored for alarm and trouble conditions.
Because the TR-MONITOR-2 is capable of monitoring two separate Class B circuits, it is ideal for waterflow tamper switch and flow switch monitoring.

Category:

Description

Addressable Dual Monitor Module

 

The TR-MONITOR-2 is an addressable monitor module with two initiating circuits for use with Triga fire alarm control panels (FACPs). The TR-MONITOR-2 acts as an interface to contact devices, such as waterflow switches and pull stations.

 

The TR-MONITOR-2 supports Class B supervised wiring to the load device. Conventional 4-wire smoke detectors can be monitored for alarm and trouble conditions.
Because the TR-MONITOR-2 is capable of monitoring two separate Class B circuits, it is ideal for waterflow tamper switch and flow switch monitoring.

 

INSTALLATION
The TR-MONITOR-2 mounts directly into a 4” square electrical box. The box must have a minimum depth of 2-1/8”. A surface mount electrical box (TR-SMB500) is available from Triga.

 

COMPATIBILITY
The TR-MONITOR-2 is compatible with the following Triga Series FACPs:
• TR-2100R / ITR-2100B
• TR-2100ECSR / TR-2100ECSB
• TR-R2100R / TR-R2100B

Features & Benefits

• Isolates short circuits on an SLC loop
• Protects the modules on the SLC loop so other devices continue to operate
• Panel controlled status LED that flashes green in normal state and is solid red in alarm
• Standard 4 inch electrical box mounting
• SEMS screws for easy wiring
• UL Listed

• FM approved

Technical Specifications

PHYSICAL
4.5″ H x 4″ W x 1.25 D ( 11.4 x 10.2 x 3cm)
Shipping Weight: 6.3oz (196g)

 

ELECTRICAL RATINGS
Operating Voltage: 15 – 32 VDC
Current Draw (LED on): 5.0mA max
Operating Current (LED flashing): 375μA
Standby Current: 400 μA max @ 24 VDC (one communication every 5 sec with 47K EOL); 550 μA max @ 24 VDC (one communication every 5 sec
with EOL <1K)
5.5 mA (with LED latched on)
LED Current: 5.5 mA (with LED latched on)
End-of-Line Resistance: 47K W
Initiating Device Circuit Wiring Resistance: 1,500Ω max SLC Loop Resistance: 40 W max.

 

ORDERING INFORMATION
TR-MONITOR: Monitoring Module

 

ACCESSORIES
TR-SMB500: 4” Square surface mount electrical box

Resources

Download Datasheet
Download Installation Manual

Related products