Products

EMERGENCY COMMUNICATION SYSTEM
EMERGENCY COMMUNICATION SYSTEM

TR-50W

The TR-50W (red cabinet) is intelligent 50 watt amplifiers for use with the TR-2100ECSR /TR-2100ECSB. The TR-50W is used to amplify the audio message for distribution throughout the facility. Since it is designed as a selfcontained distributed amplifier it can be conveniently located near the area of protection to reduce wiring demands. The TR-50W is capable of producing 50-watts of audio power. Up to eight TR-50W’s can be used on the voice evacuation system. The TR-50W has its own power supply with battery backup and four speaker circuits which can be expanded to eight speaker circuits with the optional TR-CE4. The TR-50W is fully supervised by the main panel for trouble conditions.

Category:

Description

Intelligent 50 Watt Amplifier

 

GENERAL
The TR-50W (red cabinet) is intelligent 50 watt amplifiers for use with the TR-2100ECSR /TR-2100ECSB. The TR-50W is used to amplify the audio message for distribution throughout the facility. Since it is designed as a self-contained distributed amplifier it can be conveniently located near the area of protection to reduce wiring demands. The TR-50W is capable of producing 50-watts of audio power. Up to eight TR-50W’s can be used on the voice evacuation system. The TR-50W has its own power supply with battery backup and four speaker circuits which can be expanded to eight speaker circuits with the optional TR-CE4. The TR-50W is fully supervised by the main panel for trouble conditions.

 

COMPATIBILITY
The TR-50W is compatible with the following Triga Series voice evacuation components: R-2100ECSR /TR-2100ECSB.

Features & Benefits

• SBUS addressable, up to eight TR-50Ws per system for a total of 400 watts.
• Each TR-50W is supervised and has four onboard audio circuits expandable to eight with the TR-CE4 for a system total of 64 audio circuits.
• TR-50W uses an easy to install wire harness to connect the TR-CE4 audio circuit expander.
• Can be mounted up to 6000 feet away from Triga-Series panel.
• The TR-50W has it’s own power supply and backup battery.
• Selectable for 25V or 70.7V operation.
• Six-wire connection to ECS system: Two-wires for the voice bus and four-wires for the SBUS connections.
• UL 864 and UL 2572.
• Available in a red or black cabinet.
• The TR-50W can be surface or flush mounted.
• 120 VAC or 240 VAC operation.
• Distributed between up to 128 audio circuits.

Technical Specifications

PHYSICAL
Flush Mount Dimensions: 14.5”W x 24.75”H x 3.4”D
(36.8 W x 62.9 H x 8.7 D cm)
Overall Dimensions: 16”W x 26.25”H x 4.1”D
(40.6 W x 66.7 H x 10.5 D cm)
Color: Red or Black

 

ENVIRONMENTAL
Operating Temperature: 32°F to 120°F (0°C to 49°C) Humidity: 10% to 93% relative humidity
(non- condensing)

 

ELECTRICAL
TR-50WHV 25V: 240V, 50/60Hz, 200mA standby current, 600mA Alarm Current (fully loaded system)
TR-50WHV 70V: 240V, 50/60Hz, 200mA standby current, 600mA Alarm Current (fully loaded system)
Main ECS Panel SBUS Standby & Alarm: 10mA
Speaker Circuit: 50 watts @ 25Vrms or 70.7Vrms max.
Battery Charging Capacity: 7 – 35AH
Battery Size: 18AH max allowed in cabinet.

 

FLEXPUT CIRCUITS
Eight circuits that can be programmed
individually as:
Notification Circuits: 3A per circuit @ 27.4VDC, power limited
Auxiliary Power Circuits: 3A per circuit @ 27.4VDC, power limited.
Initiation Circuit: 100mA per circuit @ 27.4VDC, power-limited

Voice Integration Wiring:
Six conductor
Two voice bus
Four SBUS

 

ORDERING INFORMATION
TR-50W: High Voltage (204VAC) 50 Watt Amplifier

 

ACCESSORIES
TR-CE4: Audio Circuit Expander
RBB: Remote Battery Box accessory cabinet. Use for backup batteries up to 35AH and too large to fit into ECS-50W cabinet
AB-55: Remote Battery Box accessory cabinet Use for back batteries up to 35AH
TR-SCK: Seismic Compliance Kit

 

AGENCY LISTING
NFPA 13, NFPA 70, NFPA 72, UL 2572, UL 1711 & UL 864: Local Protective Signaling Systems
UL Listed

Resources

Download Datasheet
Download Installation Manual

Related products